Parallel Hybrid Solar Inverter 5KW 10KW
Caractéristiques:
1. Pure sine wave output
2. Self design PCB board and cooling system
3.MPPT efficiency max 98%
4.Optional built-in MPPT controller
5.High Efficiency Design & “Power Saving Mode” to Conserve Energy
6. Auto Restart when Ac in recovering
7.Parallel Function Up to Maximum 9 Units
8.Selectable charging current based on applications
9.AC start-up voltage auto restart voltage
10. Supports lithium battery communication and external WIFl
Mode | 5KW | 10KW |
RATED POWER | 5000W | 10000W |
SAISIR | ||
AC Input Voltage | 220VAC (standard) | |
Input Voltage Range | 90-270VAC±3V (Normal mode ) 170-275VAC±3V (UPS Mode) | |
Fréquence | 50 /60 Hz ±5% | |
SORTIR | ||
AC Model Output Voltage | The output voltage under the mains is the same as the input voltage | |
AC Model Output Frequency | The output frequency under the mains is the same as the input frequency | |
Wave form | Onde sinusoïdale pure | |
BATTERIE | ||
Battery model output voltage | 220VAC ±5% | |
Battery model output frequency | 50HZ or 60HZ ±1% | |
Battery Charging Voltage | 56.4VDC (Can setting range : 48V-61V ) | |
Voltage de batterie | 48VDC | |
CHARGEUR SOLAIRE | ||
Puissance maximale du générateur photovoltaïque | 3200W | 6400W |
Solar input voltage range | 48V:MPPT 60V-150VDC ( Can customized with 200VDC) | |
Max PV Display Open Circuit Voltage | 48V:MPPT150VDC ( Can customized with 200VDC) | |
Maximum Solar Charging Current | 60A | 120A |
Maximum AC Charging Current | 30A | 60A |
Temps de transfert | ≤10ms (UPS Mode) ,≤20ms ( INV Mode) | |
Parallel interface | RS232,lithium battery BMS communication , parallel interface,dry junction card | |
PHYSIQUE | ||
Dimension,D*W*H(mm) | 527*330*149 | 545*400*200 |
LCD Display | General LCD | |
OPÉRATION ENVIRONNEMENT | ||
Humidité | 20%~90% Relative Humidity (Non-condensing) | |
Température de fonctionnement | -10 ℃-50 ℃ | |
Température de stockage | -10℃-45℃ | |
Noise | <45dB |